模块基本信息
General Information for MODULE
介绍
INTRODUCTION
SSOT的模块是一种便于使用 、高亮度 、高可靠性的VFD产品。模块可以提供5x7点阵、9x9点阵 、字母 、数字等类型的显示；由于内建了DC/DC转换电路，所以只需要5伏电源输入就可以操作；采用内置MCU，CG-ROM等方式 ，可以实现多种字符的显示 。
SSOT VFD modules have been developed for more convenient usage of high-brightness and high-reliability VFDs.
The Module employs 5x7Dot, 9x9Dot.Alpha-Numeric type VFD as its display devices and requires +5Vde power to operate the module, since the necessary voltage is formed from the DC/DC Converter.
By using the built-in MCU, CG-Rom, various characters can be displayed by ASCII Code input.
特点
Features
l 5伏电源输入（部分型号提供宽电压输入：+5伏~+24伏）
l +5V power source is needed to operate the module.
(Some modules provide a wide operating voltage: +5Vdc ~ +24Vdc.)
l 单片控制器提供了灵活的数据输入和编辑模式。
通过TTL电平接口 ，模块可以直接连接到主机系统。
l One chip controller provides the flexible data entry and editing mode.
The module can be directly connected to the host system using TTL level interface.
l 兼备并口和串口通信功能；串口通信时，波特率选择范围是300bps到19200bps；通过亮度控制功能可以实现亮度多阶调整。
l Either parallel or serial data input mode can be selected.
In case of serial input, it is possible to choose baud-rate from 300 to 19,200 bps
Brightness can be controlled into several levels by dimming function.
l 欧文和日文字库可以选择。
l Either European or Japanese Katakana font can be switchable selected.
l 提供多达16个字符的自定义字库。
l The module has up to 16 User Definable Fonts (UDF).
一般规格
General Specifications
l 电气规格
l Electrical Specifications
- 供电电压 ：+5伏（部分型号提供宽电压输入 ：+5伏~+24伏）
- Supply Voltage: +5V
(Some modules provide a wide operating voltage: 5V - 24V.)
- 接口信号 ：TTL电平（部分型号提供RS-232或USB接口）
- interfacing Signal: TTL level
(Some modules are available to interface by using RS-232C or USB.)
l 光学规格
l Optical Specifications
- 亮度：典型值 700 cd/m2 (204 ft-L)
- Luminance: Typical 700 cd/m2 (204 ft-L)
- 颜色：蓝绿色， 波长：505nm
- Color: Blue - Green. Peak Wave = 505 nm
l 环境规格
l Environment Specifications
-.操作温度：-20℃~+70℃
- Operating Temperature: -20℃~+70℃
- 存储温度 ：-40℃~+85℃
- Storage Temperature: -40℃~+85℃
※详细内容请查阅单独规格书
※See individual specification for details.
※本目录里的描述和规格如有更改，恕不通知
※The descriptions and specifications in this catalogue are subject to change without prior notice.
图形类型模块
Graphic Type VFD Module
l 采用内置专用芯片(单片控制器)，每一个点可以独立控制 。
l By using the built-in ASIC(One-Chip Controller), you easily operate VFDs by addressing each dot individually.
l 图形类型模块集合了VFD显示技术 、驱动技术和接口技术，提供了一个集成化、低成本的产品。
l Graphic modules combine VF Display technology with driving circuitry and interface circuit in a compact and low cost package.
l SSOT的全点阵图形模块为您的困难提供了解决方案。
l SSOT’s full-dot graphic VFD modules offer the solution to your difficulties.
l 图形类型的模块几乎可以显示所有的信息，包括数字、字符和图形。
l Graphic VFD modules can display almost information, including numerals, characters and graphics.
l 图形类型的模块应用到衡器、计算器、收银机 、提款机、医疗设备 、通讯设备、测量设备和医院、银行、车站或建筑物的信息板上 。
l Graphic VFD modules are being used for high performance Scales, ECR, POS, ATM, Medical, Communication, Measuring equipment, Elevators and lots of information Boards in Hospitals, Banks, Complexes,Buildings, Stations, etc.
l 点阵数的组成和显示区域可以灵活组合。
l Composition of Dot Matrix and Display areas are flexible.
特点
Features
l 高品质显示和亮度表现
l High quality of display and luminance
l 采用扁平封装集成电路驱动器和单片控制器，使模块产品紧凑、轻量化
l Compact and light-weight unit by using flat packed display drivers and one-chip VFD controller
l 简单的结构电路
l Driving through a simple interface
l 高速8位数据写入
l High speed 8bit data write-in capability
l 软件对亮度可调
l Luminance adjustment available by software
021-57791698
